5.00M33 自製系統升級教學
=== 程式需求 ===對應機種：PSP-100X / PSP-200X
對應系統版本：3.50 M33-4 或以上 (如何檢查系統版本: 圖1, 圖2)
注意點:
-4 .01至5 .00
-錯誤的解決方法是：變更xmb下的cpu速度為222，而且在PSP的亮度設為0級。
注意使用pspstates插件的用戶：此插件專為4.01而設，運行在5.00M33可能會造成問題，請等到更新的插件。
視像教學:
http://hk.youtube.com/watch?v=jkudqFuwwHM
檔案下載點 5.00 M33-6 安裝包下載 (HKPSP)5.00 M33-5 安裝包下載 (HKPSP)5.00 M33-4 安裝包下載 (HKPSP)5.00 M33-3 安裝包下載 (HKPSP)5.00 M33-2 安裝包下載 (HKPSP)5.00 M33 安裝包下載 (HKPSP)官方 5.00 升級檔下載 (HKPSP)
檔案解壓密碼:
www.hkpsp.net
===升級前注意事項===
-Restore Default Settings (還原出廠設定) [不要選中文, 選英文或日文]
-充電到 75 % 或以上, 建議連接 交流電轉接器 以防萬一 [低於 75% 會自動退出程式, 按 三角 + L 可跳過檢查]
-升級中途絕對不要關機 或 休眠待命 (不然一定變磚~ = =)
-避免使用 假MSD 升級, 否則有可能出現預期以外的問題
-升級前請先完全關機, 按著 R 開啟PSP, 進入 Recovery mode --> Configuration -> Game folder homebrew ->3.XX/4.XX Kenrel === 升級 5.00M33-6 ===
1.此升級檔可在3.52M33-3至 5.00M33-5上執行，先到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，確認版本是否正確。
http://p.l1.hk/hd/hd/admin/500m33/500m33_5.bmp
2.下載5.00 M33-6安裝包並解壓。
3.解壓後把資料夾 UPDATE 放到X:\PSP\GAME下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
4.若已經是5.00M33以上之版本，不需理會此部份，直接跳至第5.步
下載官方5.00升級檔並解壓，然後將 EBOOT.PBP,改名為500.PBP，放到X:\PSP\GAME\UPDATE資料夾內。
http://p.l1.hk/hd/hd/admin/500m33/500_place.png
5.開啟 PSP 運行升級程式。
http://p.l1.hk/hd/hd/andymhleung/hd/psp/img/500M336/10.png
6. 按畫面指示按"X"鍵開始升級。
http://p.l1.hk/hd/hd/andymhleung/hd/psp/img/500M336/11.png
7. 等侍5.00m33-6升級完成，6秒後自動重開PSP
http://p.l1.hk/hd/hd/andymhleung/hd/psp/img/500M336/12.png
8. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，
查看版本是否 5.00M33-6，如是，升級完成。
http://p.l1.hk/hd/hd/andymhleung/hd/psp/img/500M336/13.png === 升級 5.00M33-5 ===
1.此升級檔可在3.52M33-3至 5.00M33-4上執行，先到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，確認版本是否正確。
http://p.l1.hk/hd/hd/admin/500m33/500m33_4.bmp
2.下載5.00 M33-5安裝包並解壓。
3.解壓後把資料夾 UPDATE 放到X:\PSP\GAME下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
4.若已經是5.00M33以上之版本，不需理會此部份，直接跳至第5.步
下載官方5.00升級檔並解壓，然後將 EBOOT.PBP,改名為500.PBP，放到X:\PSP\GAME\UPDATE資料夾內。
http://p.l1.hk/hd/hd/admin/500m33/500_place.png
5.開啟 PSP 運行升級程式。
http://p.l1.hk/hd/hd/admin/500m33/500m33_5_up.bmp
6. 按畫面指示按"X"鍵開始升級。
http://p.l1.hk/hd/hd/admin/500m33/500m33_5_uf.bmp
7. 等侍5.00m33-5升級完成，6秒後自動重開PSP
http://p.l1.hk/hd/hd/admin/500m33/500m33_5_uf2.bmp
8. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，
查看版本是否 5.00M33-5，如是，升級完成。
http://p.l1.hk/hd/hd/admin/500m33/500m33_5.bmp
===============
5.00M33-5 更新：
===============
This update is a try to fix memory stick low speed since 3.80.
- A setting has been added to recovery, that, when enabled it mayincrease memory stick reading speed. (only on the psp, not in the pc).
By default it is disabled. If you installed 3.71 fatmsmod, do not usethis setting, as its perfomance with 3.71 driver has not been tested.
Instead, reinstall 5.00 m33-4 using dc8 and update to 5.00 m33-5
The included file fat_comparison.html contains a comparison ofperfomance between the 5.00 fat driver, the 3.71 one, and the 5.00 onewith the speed up hack during the read of an iso.
The test was done on the game Valkyrie Profile in cso format in march33mode. Other games, modes and applications different than iso readingshowed similar results. === 升級 5.00M33-4 ===
(如你是使用上面的5.00M33-5安裝包，你不需要理會此部份)
1.此升級檔可在 5.00M33 或 5.00M33-3上執行，先到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，確認版本是否 5.00M33 或 5.00M33-3。
http://p.l1.hk/hd/hd/andymhleung/img/500m334/1.jpg
2.下載5.00 M33-4安裝包並解壓。
3.解壓後把資料夾 UPDATE 放到X:\PSP\GAME下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
4.開啟 PSP 運行升級程式。
http://p.l1.hk/hd/hd/andymhleung/img/500m334/2.jpg
5. 按畫面指示按"X"鍵開始升級。
http://p.l1.hk/hd/hd/andymhleung/img/500m334/3.jpg
6. 等侍5.00m33-4升級完成，6秒後自動重開PSP
http://p.l1.hk/hd/hd/andymhleung/img/500m334/4.jpg
7. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處，
查看版本是否 5.00M33-4，如是，升級完成。
http://p.l1.hk/hd/hd/andymhleung/img/500m334/5.jpg
===============
5.00M33-4 更新：
===============
- Speed selected for umd/iso was not properly locked in some new gamesthat used scePower_EBD177D6 instead of scePowerSetClockFrequency tochange speed.
- UMD/ISO speed settings now apply to PSN games too.
- Fixed libupdown.prx connecting to dark-alex.org instead of sony whennpsignin_plugin checks for a new version and m33 update is enabled.
- Iso file descriptor was not closed in driver deletion
- Added a shutdown command to vshmenu. 5.00M33-3升級說明
(如你是使用上面的5.00M33-4安裝包，你不需要理會此部份)
1. 此升級檔可在 5.00M33 或 5.00M33-2上執行，確認你的系統為 5.00M33 或 5.00M33-2。
http://p.l1.hk/hd/hd/admin/500m33/DSCN2476.jpg
2. 下載5.00M33-3安裝包並解壓。
3. 解壓後把UPDATE這個資料夾放到X:\PSP\Game下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
4. 在 PSP運行升級程式。
http://p.l1.hk/hd/hd/admin/500m33/500m33_up.bmp
5. 依畫面指示，按X鍵開始刷機。
http://p.l1.hk/hd/hd/admin/500m33/DSCN2517.jpg
6. 來到這裡先等等，6秒後會彈回XML
http://p.l1.hk/hd/hd/admin/500m33/DSCN2518.jpg
7. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處查看版本是否 5.00M33-3，如是，升級完成。
http://p.l1.hk/hd/hd/admin/500m33/snap001.jpg
===============
5.00M33-3 更新：
===============
- A bug was introduced in 5.00 M33-2 that made some games and homebrew not to work.
- PSN version check is now automatically bypassed without need of touching any setting. 5.00M33-2 升級說明
(如你是使用上面的5.00M33-3安裝包，你不需要理會此部份)
1. 確認你的系統為5.00M33。
http://p.l1.hk/hd/hd/admin/500m33/DSCN0119.jpg
2. 下載5.00M33-2安裝包並解壓。
3. 解壓後把UPDATE這個資料夾放到X:\PSP\Game下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
4. 在 PSP運行升級程式。
http://p.l1.hk/hd/hd/admin/500m33/DSCN2471.jpg
5. 依畫面指示，按X鍵開始刷機。
http://p.l1.hk/hd/hd/admin/500m33/DSCN2538.jpg
6. 來到這裡先等等，6秒後會彈回XML
http://p.l1.hk/hd/hd/admin/500m33/DSCN2478.jpg
7. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處查看版本是否 5.00M33-2，如是，升級完成。
http://p.l1.hk/hd/hd/admin/500m33/DSCN2476.jpg
===============
5.00M33-2 更新：
===============
- Popcorn bug fixes
* Fixed bug that caused some games with certain icons not to work, and caused document.dat not to work.
* Fixed critical bug that caused continous corruption of psx games in RAM.
- Core bugfix: Fixed sctrlKernelSetInit* functions not working.
- M33 network update doesn't work in 5.00 M33, fixed.
- Added the posibility of loading version information from the file flash0:/vsh/etc/version.txt
By default is disabled. If you enable it in recovery, you could for example dump 5.01 firmware,
copy theversion.txt from it to the flash, and bypass firmware check restrictions like those that
may bein psn, etc.
This will also fake official network update (not m33 one), and running the update eboot (again, not m33 ones).
- Plugins configuration file format changed.
The new format is as follows:
* There is no more conf.bin file.
* Now each line in vsh.txt game.txt and pops.txt will have a 0 or a 1 at the end. 1 indicates
that the plugin will be loaded, 0 (or anything else) that it won't be loaded.
Entering in recovery in 5.00 M33-2 wil automatically convert the old format configuration
to the new one (this may cause a delay first time you enter in plugins because of conversion).
- Added optins under advanced configuration that allow enable/disable of plugins in a certain configuration.
By default they are enabled. === 升級 5.00M33 ===
(如你是使用上面的5.00M33-2安裝包，你不需要理會此部份)
1.此升級檔可在運行 3.52M33-3 至 4.01M33-2 之自製系統上，下載5.00 M33安裝包並解壓。
2.解壓後把資料夾 UPDATE 放到X:\PSP\GAME下。
http://p.l1.hk/hd/hd/aychunhim/4.01M33/mspd_place.jpg
3.下載官方5.00升級檔並解壓，然後將 EBOOT.PBP,改名為500.PBP，放到X:\PSP\GAME\UPDATE資料夾內。
http://p.l1.hk/hd/hd/admin/500m33/500_place.png
4.開啟 PSP 運行升級程式。
http://p.l1.hk/hd/hd/admin/500m33/500m33_up.bmp
http://p.l1.hk/hd/hd/admin/500m33/20090122185941.png
5. 按畫面指示按"×"鍵開始升級。
http://p.l1.hk/hd/hd/admin/500m33/20090122190247.png
6. 按"O" start。
http://p.l1.hk/hd/hd/admin/500m33/20090122201938.png
7. 一大段廢話，按"→"
http://p.l1.hk/hd/hd/admin/500m33/20090122201946.png
8.選"同意"再按"→"
http://p.l1.hk/hd/hd/admin/500m33/20090122201956.png
9. 按"O" 開始升級
http://p.l1.hk/hd/hd/admin/500m33/20090122190344.png
10. 等侍5.00m33-6升級
http://p.l1.hk/hd/hd/admin/500m33/20090122190354.png
http://p.l1.hk/hd/hd/admin/500m33/20090122190409.png
http://p.l1.hk/hd/hd/admin/500m33/20090122202118.png
http://p.l1.hk/hd/hd/admin/500m33/20090122190539.png
11. 完成,按"O"自動重開PSP
http://p.l1.hk/hd/hd/admin/500m33/20090122190603.png
12. 到 SYSTEM SETTINGS ---> SYSTEM INFORMATION 處查看版本是否 5.00M33，如是，升級完成。
http://p.l1.hk/hd/hd/admin/500m33/500m33.png
=============
5.00M33 更新：
=============
- 4.01 to 5.00
- Bug fix: when changing speed in xmb, and the psp turned the brightness to 0 automatically the speed was reseted to 222 again.
Note to pspstates plugin users: this plugin won't work in this firmware due to it being made
specifically for 4.01. Running it in 5.00 M33 can cause problems, wait until an update of plugin.
- Translating the recovery.
To translate the recovery create a text file in ms0:/seplugins/xx_recovery.txt
or flash1:/xx_recoery.txt (they are evaluated in that order), where xx is the language code
of your language:
es -> spanish
en -> english
fr -> french
de -> german
it -> italian
ja -> japanese
ko -> korean
nl -> netherlands
pt -> portuguese
ru -> russian
ch1 -> chinese simplified
ch2 -> chinese traditional
The file en_recovery.txt in translate folder is included for people totranslate to their languages, this file is not needed for englishpeople, as the english language is used when no language file is found.
Just change the english strings to your language ones, and put it inthe path mentioned above. Be careful to check in the recovery that thelines look fine, don't use too large text.
The spanish file es_recovery.txt will be written by the program in the memory stick.
背景比以往美觀了。
http://p.l1.hk/hd/hd/admin/500m33/DSCN0118.jpg
加入了新的功能: PlayStationNetwork
http://p.l1.hk/hd/hd/admin/500m33/DSCN0121.jpg
页:
[1]